Netgear FVS318 FVS318 Reference Manual - Page 184
Type the starting LAN IP Address of Gateway B, Type the finishing Subnet Mask of Gateway B
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall - Type the starting LAN IP Address of Gateway B (10.5.6.1 in our example) in the Local IP Remote LAN Start IP Address field. - Type the finishing Subnet Mask of Gateway B (255.255.255.0 in our example) in the Remote LAN IP Subnetmask field. - Type the WAN IP address (14.15.16.17 in our example) of Gateway A in the Remote WAN IP or FQDN field. Figure F-3: NETGEAR FVS318 vA1.4 VPN Settings (part 2) - Main Mode - From the Secure Association drop-down box, select Main Mode. - Next to Perfect Forward Secrecy, select the Enabled radio button. - From the Encryption Protocol drop-down box, select 3DES. - In the PreShared Key box, type a unique text string to be used as the shared key between Gateway A and Gateway B. In this example we used hr5xb84l6aa9r6. You must make sure the key is the same for both gateways. - In the Key Life box, enter 3600 seconds. - In the IKE Life Time, enter 28800 seconds. - Check the NETBIOS Enable box if you wish to pass NetBIOS traffic over the VPN tunnel, allowing functions such as Microsoft Network Neighborhood browsing. 3. Click Apply to save all changes. This will return you to the VPN Settings screen. 4. When the screen returns to the VPN Settings, make sure the Enable checkbox is selected. F-4 NETGEAR VPN Configuration FVS318 or FVM318 to Cisco IOS M-10146-01