Netgear FVS318 FVS318 Reference Manual - Page 93
For Encryption Protocol, select one, Select the Authentication Protocol
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall The SPI should be a string of hexadecimal [0-9,A-F] characters, and should not be used in any other Security Association. Note: For simplicity or troubleshooting, the Incoming and Outgoing SPI can be identical. 4. For Encryption Protocol, select one: Figure 6-23: VPN encryption options • Null - Fastest, but no security. • DES - Faster but less secure than 3DES or AES. • 3DES - (Triple DES) higher level of security than DES. • AES - 128, - 192, or - 256. Most secure. 5. Enter the key according to the requirements of the Encryption Protocol you selected. Enter an Encryption Key in hexadecimal characters [0-9,A-F]. - For DES, the key should be 8 characters. - For 3DES, the key should be 24 characters. - For AES 128, the key should be 16 characters - For AES 192, the key should be 24 characters - For AES 256, the key should be 32 characters Any value is acceptable, provided the remote VPN endpoint has the same value in its Pre-Shared Key field.The encryption key must match exactly the key used by the remote router or host. 6. Select the Authentication Protocol • MD5 (default) - 128 bits, faster but less secure. • SHA-1 - 160 bits, slower but more secure. 7. Enter hexadecimal characters [0-9,A-F] for the Authentication Key. The authentication key must match exactly the key used by the remote router or host. - For MD5, the key should be 16 characters. - For SHA-1, the key should be 20 characters. Virtual Private Networking M-10146-01 6-29