Netgear FVS318 FVS318 Reference Manual - Page 195

Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall 6. Click on the VPN Settings link on the left side of the main menu. - For the FVS318: Click the radio button of the first available VPN tunnel. Click the Edit button below. This will take you to the VPN Settings - Main Mode Menu. - For the FVM318: Click Add. This will take you to the VPN Settings - Main Mode Menu. Figure G-3: NETGEAR FVS318 vA1.4 VPN Settings (part 1) - Main Mode - In the Connection Name box, enter in a unique name for the VPN tunnel to be configured between the NETGEAR devices. For this example we have used toFVL328. - Enter a Local IPSec Identifier name for the NETGEAR FVS318 Gateway A. This name must be entered in the other endpoint as Remote IPSec Identifier. In this example we used netgear.dyndns.org (the FQDN) as the local identifier. - Enter a Remote IPSec Identifier name for the remote NETGEAR FVL328 Gateway B. This name must be entered in the other endpoint as Local IPSec Identifier. In this example we used 22.23.24.25 as the remote identifier. - Choose "a subnet of local addresses" from the" Tunnel can be accessed from" pull-down menu. - Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Local IP Local LAN start IP Address field. NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVL328 G-5 M-10146-01