Netgear R7800 User Manual - Page 23
Requirements for Entering IPv6 Addresses, Use Auto Config for an IPv6 Internet Connection
View all Netgear R7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Nighthawk X4S AC2600 Smart WiFi Router • Set Up an IPv6 6to4 Tunnel Internet Connection on page 26 • Set Up an IPv6 Pass Through Internet Connection on page 27 • Set Up an IPv6 Fixed Internet Connection on page 28 • Set Up an IPv6 DHCP Internet Connection on page 29 • Set Up an IPv6 PPPoE Internet Connection on page 31 6. Click the Apply button. Your settings are saved. Requirements for Entering IPv6 Addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero or omit it. The following errors invalidate an IPv6 address: • More than eight groups of hexadecimal quartets • More than four hexadecimal characters in a quartet • More than two colons in a row Use Auto Config for an IPv6 Internet Connection To set up an IPv6 Internet connection through auto configuration: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select Auto Config. Specify Your Internet Settings 23