Netgear R7800 User Manual - Page 71
To set up the router as an AP, Network Settings, Nighthawk X4S AC2600 Smart WiFi Router, admin
View all Netgear R7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Nighthawk X4S AC2600 Smart WiFi Router To set up the router as an AP: 1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router. 2. Launch a web browser from a computer or wireless device that is connected to the network. 3. Type http://www.routerlogin.net . A login window opens. 4. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 5. Select ADVANCED > Advanced Setup > Wireless AP. 6. Select the Enable AP Mode check box. 7. Scroll down and select an IP address setting: • Get dynamically from existing router. The other router on the network assigns an IP address to this router while this router is in AP mode. Network Settings 71