Netgear WAX204 User Manual - Page 47
DHCP Domain Name if Required, Get Automatically from ISP, Use These DNS Servers, Use DHCP Server
View all Netgear WAX204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204 Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here. 7. (Optional) In the DHCP Domain Name (if Required) field, enter a domain name. You can type the domain name of your IPv6 ISP. Do not enter the domain name for the IPv4 ISP here. For example, if your ISP's mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. For example, Earthlink Cable might require a host name of home, and Comcast sometimes supplies a domain name. 8. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns these addresses. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IPv6 address of your ISP's primary DNS server. If a secondary DNS server address is available, enter it also. 9. In the LAN Setup section, select an IP Address Assignment radio button: • Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems might not support the DHCPv6 client function. • Auto Config. This is the default setting. This setting specifies how the access point assigns IPv6 addresses to the devices on your home network (the LAN). 10. (Optional) In the LAN Setup section, select the Use This Interface ID check box and specify the interface ID to be used for the IPv6 address of the access point's LAN interface. If you do not specify an ID here, the access point generates one automatically from its MAC address. 11. Select an IPv6 Filtering radio button: • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 12. Click the Apply button. Your settings are saved. Manually Set Up Internet 47 Settings User Manual