Netgear WG302v2 WG302v2 Reference Manual - Page 90
Configuring Wireless Settings, Table C-7, Wireless Setting s, Basic Setting continueds
View all Netgear WG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual Table C-6 Basic Setting (continued)s Task Command Set the Primary DNS Server set host static-dns-1 Example: set host static-dns-1 10.10.3.10 Set the Secondary DNS Server set host static-dns-2 Enable Spanning Tree Protocol set interface brvlan1 stp on Disable Spanning Tree Protocol set interface brvlan1 stp off Set the Management VLAN ID set management vlan-id Enable Untagged VLANs and set set untagged-vlan untagged-vlan-id the VLAN ID Set the Time Zone set ntp timezone Enable the NTP Server set ntp status up Disable the NTP Server set ntp status down Use a custom NTP server set ntp use-default-servers off Use the default NTP server set ntp use-default-servers on Set the Hostname or IP Address for the custom NTP server Note: You can set a primary and secondary NTP server. set ntp-servers [primary | secondary] server [ | ] Example: set ntp-serves primary ntp.foo.com or set ntp-servers primary server 192.168.1.10 View the Current Time date Configuring Wireless Settings The commands in Table C-7 correspond to the Wireless Settings page on the Web UI. Table C-7 Wireless Setting s Task Turn on the Radio Turn off the Radio Command set interface wlan0 status up set interface wlan0 status down C-8 Command Line Reference v1.0, May 2006