Netgear WG302v2 WG302v2 Reference Manual - Page 94
RADIUS Server Settings, Table C-10, Security Profile Settings continued
View all Netgear WG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual Table C-9 Security Profile Settings (continued) Task Command Set Network Authentication to WPA and WPA2 with RADIUS set interface wlan0 security wpa-enterprise set bss wlan0bssvap0 wpa-allowed on set bss wlan0bssvap0 wpa2-allowed on Enable Wireless Client Security set radio wlan0 station-isolation on Separation Disable Wireless Client Security set radio wlan0 station-isolation off Separation Set the VLAN ID for the Security set vap vap0 with radio wlan0 vlan-id Profile RADIUS Server Settings The commands in Table C-10 correspond to the RADIUS Server Settings page on the Web UI. Table C-10 RADIUS Server Settings Task Set the IP Address of the Primary Authentication Server Set the Port Number of the Primary Authentication Server Set the Shared Secret for the Primary Authentication Server Set the IP Address of the Secondary Authentication Server Set the Port Number of the Secondary Authentication Server Set the Shared Secret for the Secondary Authentication Server Set the IP Address of the Primary Accounting Server Command set radius-client primary-authentication-server set radius-client primary-authentication-port set radius-client primary-authentication-key set radius-client secondary-authentication-server set radius-client secondary-authentication-port set radius-client secondary-authentication-key set radius-client primary-accounting-server C-12 v1.0, May 2006 Command Line Reference