Netgear WNHD3004 WNHD3004 User Manual - Page 18
After 1-2 minutes the new unit in Bridge mode should be associated with the existing unit
View all Netgear WNHD3004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3DHD Home Theater Adapter WNHD3004 User Manual 2. Connect the power adapter. The power light should blink in green. Figure 2-5 3. On the new WNHD3004, press the WPS button; its WPS light will blink.Within 2 minutes, press the WPS button on the existing Wireless-N Bridge which is operating in AP mode. Its WPS light will start to blink. After 1-2 minutes the new unit in Bridge mode should be associated with the existing unit in AP mode. The WPS light for the AP unit and the Bridge mode unit will turn off. The power lights on both units will be steadily on. 2-6 Setting Up Your Wireless Network v1.0, November 2010
3DHD Home Theater Adapter WNHD3004 User Manual
2-6
Setting Up Your Wireless Network
v1.0, November 2010
2.
Connect the power adapter. The power light should blink in green.
3.
On the new WNHD3004, press the WPS button; its WPS light will blink.Within 2 minutes,
press the WPS button on the existing Wireless-N Bridge which is operating in AP mode. Its
WPS light will start to blink.
After 1-2 minutes the new unit in Bridge mode should be associated with the existing unit in
AP mode. The WPS light for the AP unit and the Bridge mode unit will turn off. The power
lights on both units will be steadily on.
Figure 2-5