Netgear WNHD3004 WNHD3004 User Manual - Page 19
Connecting Other Devices to a WNHD3004, Use the Setup Wizard..
View all Netgear WNHD3004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3DHD Home Theater Adapter WNHD3004 User Manual Connecting Other Devices to a WNHD3004 There are four ways you can connect other devices to the access point: • For wireless devices that support the WPS automated method, repeat the steps above for the WPS setup method. WPS will automatically transfer the security settings from the Wireless-N Access Point to the device you are adding. • For wireless devices that do not support WPS, manually configure them. Refer to the instructions in the product documentation of the wireless device you will add. The default wireless network name (SSID) is WNHD3400. • For wired devices, use an Ethernet cable to connect to an available Ethernet port on the WNHD3004. • Use the Setup Wizard.. Figure 2-6 The Setup Wizard lets you use two wizards, one that guides you through connecting a wireless device to your Access Point, and another to help you with your wireless network setup. For the Bridge/Station, this screen has only one function: to set up its wireless settings to match it on the AP side, either through WPS, or through manual settings. Setting Up Your Wireless Network 2-7 v1.0, November 2010