Netgear WNR3500Lv1 WNR3500L Setup Manual - Page 20

Make sure that the Power button on the back of your router

Get Netgear WNR3500Lv1 PDF manuals and user guides View all Netgear WNR3500Lv1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

A E F Figure 11 4. Replace the Ethernet cable connected to your modem with the Ethernet cable that came with your router, and insert one end into the same port on the modem. Then, insert the other end into the Internet port of your new router (F), as shown in Figure 11. 5. Start your network in the correct sequence, as described below. Failure to start or restart your network in the correct sequence could prevent you from accessing the Internet. To start your network: 1. Plug in the power and turn on the broadband cable modem or DSL modem. Wait 2 minutes. 2. Plug the end of the power adapter cord into the wall or a power strip, and insert the other end into the power adapter outlet of your N300 Wireless router (G), shown in Figure 12. 3. Make sure that the Power button on the back of your router (H) is in the power-on state. (The button is depressed when in power-on mode.) Wait 1 minute. Manually Installing Your Router 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Manually Installing Your Router
16
4.
Replace the Ethernet cable connected to your modem with the Ethernet cable that came with
your router, and insert one end into the same port on the modem. Then, insert the other end
into the Internet port of your new router (
F
), as shown in
Figure 11
.
5.
Start your network in the correct sequence, as described below.
To start your network:
1.
Plug in the power and turn on the broadband cable modem or DSL modem. Wait 2 minutes.
2.
Plug the end of the power adapter cord into the wall or a power strip, and insert the other end
into the power adapter outlet of your N300 Wireless router (
G
), shown in
Figure 12
.
3.
Make sure that the Power button on the back of your router (
H
) is in the power-on state. (The
button is depressed when in power-on mode.) Wait 1 minute.
Figure 11
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
A
E
F