Netgear WNR3500Lv1 WNR3500L Setup Manual - Page 8

Power, Internet, Wireless, LAN Ports 1-4, WPS button/light, Blink - Green

Get Netgear WNR3500Lv1 PDF manuals and user guides View all Netgear WNR3500Lv1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Figure 3 Power On - Amber On - Green Blink - Amber Blink - Green Off Internet On - Amber On - Green Blink - Green Off Wireless On - Blue Blink - Blue Off LAN (Ports 1-4) On - Green Blink - Green On - Amber Blink - Amber Off WPS button/light Blink - Green On - Green The router is performing the power-on self-test diagnostic. The power is on and the router is ready. A software update is in progress. The firmware is corrupt. See "Checking Basic Router Functions" on page 31 for instructions on restoring your firmware. Power is not being supplied to the router. No IP address acquired. The N300 Wireless router has acquired an Internet address. Data is being communicated with the Internet. No Ethernet cable is connected to the modem. The wireless interface is enabled. Data is being communicated over the wireless network. The wireless interface is turned off. The local port is connected to a 1000 Mbps device. Data is being transmitted at 1000 Mbps. The local port is connected to a 10/100 Mbps device. Data is being transmitted at 10/100 Mbps. No link is detected on this port. Indicates WPS activity; the device is in the 2 minute interval to synchronize security or there is a WPS error. Security set to WEP, WPA-PSK, or WPA2-PSK. Getting to Know Your Wireless Router 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Getting to Know Your Wireless Router
4
Figure 3
Power
On – Amber
The router is performing the power-on self-test diagnostic.
On – Green
The power is on and the router is ready.
Blink – Amber
A software update is in progress.
Blink – Green
The firmware is corrupt. See
“Checking Basic Router
Functions” on page 31
for instructions on restoring your
firmware.
Off
Power is not being supplied to the router.
Internet
On – Amber
No IP address acquired.
On – Green
The N300 Wireless router has acquired an Internet address.
Blink – Green
Data is being communicated with the Internet.
Off
No Ethernet cable is connected to the modem.
Wireless
On – Blue
The wireless interface is enabled.
Blink – Blue
Data is being communicated over the wireless network.
Off
The wireless interface is turned off.
LAN (Ports 1–4)
On – Green
The local port is connected to a 1000 Mbps device.
Blink – Green
Data is being transmitted at 1000 Mbps.
On – Amber
The local port is connected to a 10/100 Mbps device.
Blink – Amber
Data is being transmitted at 10/100 Mbps.
Off
No link is detected on this port.
WPS button/light
Blink – Green
Indicates WPS activity; the device is in the 2 minute interval
to synchronize security or there is a WPS error.
On – Green
Security set to WEP, WPA-PSK, or WPA2-PSK.