Netgear XM128 QIG - Quick Install Guide - Page 105
Table C-1., Basic AT command set continued
View all Netgear XM128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Reference Guide for the Model XM128 ISDN Digital Modem Table C-1. Basic AT command set (continued) Command Bnn Options B00 B01 B04 B10 B13 B14 B15 B16 B17 B18 B19 B20 B40 B41 CEn CE0 CE1 CH? CI CLn CL? CN n=0-2048 Function and description Select ISDN Teleservice. B must be followed by two digits. See also S-registers 82 and 102. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." X.75 Transparent X.75 T.70 BTX (Data X-J) V.110 user rate follows DTE speed (async) or V.110 user rate determined by in-band negotiation (sync) V.110 user rate = 2400 bps. See also S-register 117. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." V.110 user rate = 4800 bps V.110 user rate = 9600 bps V.110 user rate = 14400 bps V.110 user rate = 19200 bps V.110 user rate = 384000 bps (sync only) V.110 user rate = 576000 bps (sync only) V.120 PPP async to sync conversion SLIP async to sync conversion Call bumping for MPPP and CCB. See also S-register 85.0. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." Disable call bumping function. Enable call bumping function. Display the accumulated charging unit of the last call. Prefix number string to be added to the Calling-party-number before indicating to the DTE when the type of number denotes international. Maximum size of user data in a packet (number of octets). Inquire current setting of ATCLn. Prefix number string to be added to the calling party number before indicating to the DTE when the type of number denotes national. AT Command Set Reference C-3