Netgear XM128 QIG - Quick Install Guide - Page 84
AT Commands for Analog Calls
View all Netgear XM128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Reference Guide for the Model XM128 ISDN Digital Modem AT Commands for Analog Calls Table 8-1 lists some of the most frequently used AT commands. Table 8-1. Frequently used AT commands AT Command Description of command ATDAs Automatically dials out for device connected to PHONE 1. The number string to dial is represented by the letter s. ATDBs Automatically dials out for device connected to PHONE 2. AT&V6 View current setting of analog adapter, PHONE 1. AT&V7 View current setting of analog adapter, PHONE 2. AT&L0 Assign analog calls to PHONE 1 if the line is not in use. orATS84.5=0 AT&L1 Assign analog calls to PHONE 2 if the line is not in use. orATS84.5=1 AT&ZIn=s MSN setting, assign called phone number, s, to be answered by n port (where n=6 for PHONE 1 and n=7 for PHONE 2). AT&ZI6=s Assign the called phone number for analog adapter, PHONE 1. AT&ZI7=s Assign the called phone number for analog adapter, PHONE 2. ATS56=n Flash timer, in 100 ms unit, to set maximum duration of on/off hook transition to be recognized as flash. Table 8-2 lists the AT commands that are specific to European switches. Table 8-2. Frequently used AT commands (European switches) AT Command ATS89.6=0 ATS89.6=1 ATS89.5=0 ATS89.5=1 Description of command To disable the metering pulse for analog adapter, PHONE 1 To enable the metering pulse for analog adapter, PHONE 1 To disable the metering pulse for analog adapter, PHONE 2 To enable the metering pulse for analog adapter, PHONE 2 8-2 Analog Call Handling