Netgear XM128 QIG - Quick Install Guide - Page 114

Reference Guide for the Model XM128 ISDN Digital Modem Table C-4 lists the extended AT* command set. Table C-4. Extended AT* command set Command Options *Cn n=0-3 *C0 * *C1 *C2 *C3 *Dn n=0-39 *D0 * *Gn *GCn *HCn=s *Hn *HS *T *V *VC *G3 *G4 *G5 n=0-1 *GC0 *GC1 n=0-4 n=0-39 Function and description Character length, including start, stop and parity bit. See also S-register 15.3 and 15.4. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." 10-bit character length. 11-bit character length. 9-bit character length. 8-bit character length. Sets default dial pointer at telephone directory location n. See also S-register 29. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." See also S35.4 and S38.0. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." Security function selection. See also S-registers 36.5 to 36.7. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." Enables type 2 security, with password check. Enables type 2 security, with password check and callback. Enables type 2 security, with password check and callback; remote site enters the callback number. Callback function selection. Disables callback function. Enables callback function. Assigns callback phone number, s to storage location n. Modifies user password table at location n. Modifies supervisory password (Default: NETGEAR). Recalls the last CND (Caller ID) information. Views the Password table. Views the Callback Number table. C-12 AT Command Set Reference