Netgear XM128 QIG - Quick Install Guide - Page 108

Reference Guide for the Model XM128 ISDN Digital Modem Table C-1. Basic AT command set (continued) Command JSn KAxn KSxn Ln Mn Nn O Pn Qn Options n=0-255 *32 n=0-63 *0 n=0-63 *0 n=0-3 2 * M=0-2 M0 M1 * M2 n=0-3 3 * n=0-6 P0 * P1 P2 P3 P4 P5 P6 n=0-1 Sr.b=n Sr.b? Sr=n Sr? Q0 * Q1 Function and description Sub-threshold for MPPP in Kbps unit Add-persist time interval for BOD; BOD disabled if n=0 x= M(in Minute unit) or S(in Second unit) Sub-persist time interval for BOD; BOD disabled if n=0 x= M(in Minute unit) or S(in Second unit) Speaker volume control. The higher the value, the higher the volume. Speaker control. Speaker always off. Speaker on until call is answered. Speaker always on. Ring volume control. The No command disables the audio ring function. Return to online state D channel protocol selection (USA) for American version Northern Telecom proprietary ISDN National ISDN 1 (1 SPID) National ISDN 1 (2 SPID) Reserved AT&T custom point-to-point AT&T custom point-to-multipoint (1 SPID) AT&T custom point-to-multipoint (2 SPID) Result code displayed. See also S-register 23.7. For a description of Extended S-registers, refer to Table D-4 on page D-5 in Appendix D, "Status Registers and Result Codes." The Model XM128 modem returns result code. The Model XM128 modem does not return result code. Set bit b of S-register r to value n. The value n is a binary digit 0 or 1. Display value of bit b of S-register r. Set S-register r to value n, which must be a decimal number between 0 and 255. Display value stored in S-register r. C-6 AT Command Set Reference