Nikon COOLPIX AW100 Reference Manual - Page 47
Turning the Camera On and Off, Power Saving Function Auto Off
View all Nikon COOLPIX AW100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Step 1 Turn the Camera On Turning the Camera On and Off • When the camera is turned on, the power-on lamp (green) lights, and the monitor is turned on (the power-on lamp turns off when the monitor is turned on). • To turn off the camera, press the power switch. Both the monitor and the power-on lamp are turned off. • Hold down the c (playback) button to turn on the camera in playback mode. The Basics of Shooting and Playback C Power Saving Function (Auto Off) If no operations are performed for a while, the monitor will be turned off, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically. While the camera is in standby mode, the monitor is turned on again when any of the following buttons is pressed. ➝ Power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b (e movie-record) button Blinks No operations performed. No operations performed. 50s 3 min 21 Camera enters standby mode. Camera turns off. • The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A94). • In the default setting, the camera enters standby mode in about five minutes when you are using shooting mode or playback mode. • If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30 minutes. 23