Oki GL408e GL408e/GL412e User's Guide - Page 112

MENU TGL Setup Active Print Errors Character Set Slash Zero Image Scale SFCC Select EURO Symbol Speed CMDs AY Intensity CMD U1/U2 Move CMDs XS Sensor Param XS Media 'C' Act XS Media 'D' Act AR Pre-Feed CMD AX Fine Adj. CMD Page alignment Vert. DPI Adjust Status Response Active Yes* Print Errors Disable* Character Set PC-850* Slash Zero Disable* Image Scale Disable* Unit 4: Printer Configuration TGL EMULATION MODE (TABLE 4-13) DESCRIPTION Is the menu selection screen for the EMULATION Mode. Allows the selection of how the printer will respond to non-TGL format text to either be printed or ignored. • Yes - factory default. All data is parsed by the TGL emulation. Non-TGL data is absorbed. • No - all data is is passed to the LP+ emulation. For information on setting the LP+ Text Mode through the host data stream, refer to the TGL Programming Reference manual. Determines where and how errors will be displayed. • Disable - factory default. Errors display only on the printer's LCD. • Enable - errors are printed and displayed on the printer's LCD. Allows the character set to be selected. The options are PC-850, PC-8, or 8859-2 Latin 2. The factory default is PC-850. Determines if a zero numeral will be printed with a diagonal slash. • Disable - factory default. The zero character does not have a slash. • Enable - the zero character is overlayed with a slash. Determines if an imaged will be scaled according to the printer's print resolution. • Disable - factory default. Scaling will not take place, resulting in images that are 2% larger than images printed on the TEC printer. The image will maintain the correct proportions and result in faster printing. • Enable - images are scaled from TEC printer resolution (306 dpi) to the resolution of the TGL printer (300 dpi). GL408-412e Operator Manual 4-76 PN: 9001163A