Oki GL408e GL408e/GL412e User's Guide - Page 98
Disable, Enable, Shared, Hexadecimal, ASCII, maximum of 32 characters.
View all Oki GL408e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Unit 4: Printer Configuration WIRELESS LOCAL AREA NETWORK (WLAN) INTERFACE MODE (TABLE 4-9) MENU Power Mgt 0 ms. * DESCRIPTION Power Management. This menu allows the power-save and sleep modes to be set. The value set wil be in milliseconds. If set to zero, the power-save mode will be disabled. The allowable range is 0 to 1000 ms., and the factory default is 0 ms.. Transit Power 100% * Allows the transmission power to be set as a percentage of full power capabilities. The allowable range is 0 to 100%, and the factory default is 100%. Internat. Mode Disable* Auth Method Open* WLAN SETTING Reset WEP Keys International Mode. Allows the determination of whether the wireless option adapts to international frequency requirements in Europe. • Disable - factory default. Conforms to European standards. • Enable - does not conform to European standards. Authentification Method. Allows the authentification method used for the wireless network interface to be selected. • Open - factory default. Provides open authentification. • Shared - provides shared key authentification. Allows all four WEP keys to be simultaneously reset. WLAN SETTING WEP Key X Allows which WEP Key will be formatted in the following menus. WEP Key X Key Format Is a transitional menu screen that wil lead to menu screens that will allow the WEP Key to be formatted. Key Format Hexadecimal * Key Width 128 Bits * Byte XX 00 * Allows WEP Key input format to be selected. • Hexadecimal - factory default. Valid characters are 0 to 9 and A to F (upper case only) with a maximum of 32 characters. • ASCII - allows for alphanumeric characters to be used with a maximum of 16 characters. Allows the operator to select the width of the key desired. • 128 Bits - factory default. 32 Hex values or 16 ASCII characters. • 40 Bits - 10 Hex values or 5 ASCII characters. Enables the encryption (scramble) of information for security purposes. Up to four encription keys may be set in either ASCII or hexdecimal format, and in either 40 or 128 bits. The mode bits chosen, the greater the difficulty of decoding the information. Note: None of the WEP Key Configuration menus display on the configuration printout. GL408-412e Operator Manual 4-62 PN: 9001163A