Oki GL408e GL408e/GL412e User's Guide - Page 68
Print Profile, Enable, Disable, English, German, French, Itilian, Spanish, Portugese, Cont. Beep
View all Oki GL408e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Unit 4: Printer Configuration MENU ADVANCED MODE Run Profile Media Profile Enter to Stop ADVANCED MODE Power Saver Time Power Saver Time 15 minutes* Pwr Save Control Enable* Display Language English* Alarm On* Set Calendar MM/DD/YY hh:mm ADVANCED MODE (TABLE 4-3) DESCRIPTION This feature provides a graphical printout showing the relationship of the Paper-Out Threshold and the Gap/Mark Threshold. The profile printed is to assist in setting the thresholds for difficult media (preprinted labels and labels with poor gap/media dynamic range). When selected, the printer will advance media and print the media profile along the length of each label. The factory default is Print Profile. Displays while the printer is printing the media profile. Will continue to print until the ENTER key is pressed. Permits entry into the Power Saver TIme sub-menus. The user specified time interval for this parameter sets the amount of idle time before the printer goes into Power Saver Mode. Pressing any key or sending a print job removes the power saver message from the LCD. The options are 1, 5, 10, 15, 30, 45, 60, and 240 minutes. The factory default is 15 minutes. Permit the Power Saver mode to be enabled or disabled as preferred. • Enable - factory default. Permits the setting from the Power Saver Time menu to become effective. • Disable - the power saver feature will not function. This menu permits the language to be chosen that will appear on the operator panel LCD. The language options are: English, German, French, Itilian, Spanish, or Portugese. The factory default is English. The printer has an integrated audible alarm that may be enabled to alert the user of detected faults. The manner of audible may also be determined in this menu. • On - factory default. The audible alarm sounds 3 beeps when a fault occurs. • Cont. Beep - the audible alarm emits a continuous beep upon the detection of a fault. • Off - the audible alarm feature is disabled. Sound is not emitted upon a fault detection. This menu screen will only appear if the real-time clock chip has been installed. If installed, the menu will allow the time and date to be set. The time and date is expressed in hh:mm YYYYMMMDD. hh = hour, mm = minute, MMM = month, DD = day, YYYY = year Auto Online Enable* Allows the determination of whether the printer will automatically power up in the online state. • Enable - factory default. The printer powers up in the online state. • Disable - the printer powers up in the state that conditions dictate. Cancel Key Enable* Permits the determination of whether a cancel key may be used in the offline mode to clear all data in the print buffer. The deleted data will not be printed. If enabled, the cancel key located on the host computer keyboard shall be the underscore (_) key. • Enable - factory default. The cancel key is functional. • Disable - the cancel key is not functional. GL408-412e Operator Manual 4-32 PN: 9001163A