Oki GL408e GL408e/GL412e User's Guide - Page 17
Printer Installation, Site Location, Cable Connection
View all Oki GL408e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Unit 3: Installation PRINTER INSTALLATION This chapter provides guidance on how to station, connect, and load the printer once unpacked. Following printer setup, procede to the next chapter for information on interface selection. SITE LOCATION • Stationed on a solid flat surface. • Stationed away from hazardous materials. • Stationed within operational distance of the host based on interface specifications. CABLE CONNECTION The diagram below (Figure 3-2) displays the printer's connectors and ports for power supply and host interfacing. For interfacing, choose the desired method and connect it's respective cable as indicated. All interface boards are integrated except the LAN/WLAN board. This will have to be installed as shown. When the interface cable is connected, or the board is installed, the interface option will display in the configuration menus of the operator panel. Refer to the Configuration unit of this manual to configure the printer for host computer interfacing. NOTE: Multiple interface options may display in the printer's LCD menus, the desired option must be chosen. Host Computer Printer Interface Cable Interface Board GL408-412e Operator Manual Power Cord Power Receptacle Figure 3-2, Cable Connection Diagram 3-3 LAN/WLAN Port Parallel Connector USB Connector Serial Connector PN: 9001163A