Oki GL408e GL408e/GL412e User's Guide - Page 58

Unit 4: Printer Configuration MENU DEFINITION TABLES MENU USER MODE USER MODE (TABLE 4-1) DESCRIPTION Permits entry into the USER Mode. USER MODE Print Speed Print Darkness Pitch Offset Ver Print Offset Hor Print Offset Label Length Label Width Slash Zero Character Pitch Protocol C. Code Euro Character Ver BaseRefPoint Hor BaseRefPoint UPC Descenders Vert. DPI Adjust C128 Mode Switch Error Handling Mem Select (CC1) Orientation Slew Speed Ctrl Print Direction Tear-Off Time Label Missing Clip Page Fault Reprint Display Ribbon Ribbon Near End Units Set Label Length TOF Detect Fault TOF Adjust Mode TOF Adjust Print Speed 4 ips* Print Darkness 5* Pitch Offset 00.0 mm* Is the menu selection screen for the USER Mode. Specifies the speed in inches per second (ips) at which the media passes through the printer while printing. The speed may be adjusted in increments of 1 ips with a range from 1 to 10 ips. The factory default is 4 ips. Specifies the level of thermal energy provided from the print head to affect print darkness. The print darkness setting needed is dependent on the type of ribbon and media installed for use and also relative to print speed. The adjustment range is from -15 to +15. The factory default is -3. This setting vertically adjusts where the printer begins printing relative to top-of-form. The allowable range is -12.7 to +5 millimeters. GL408-412e Operator Manual 4-22 PN: 9001163A