Oki GL408e GL408e/GL412e User's Guide - Page 119

MENU Printer Tests Checkerboard* Test Count 5 Pages* Software Build XXXXXX VX.XXX Hex Dump Mode Disable* DIAGNOSTICS Print Error Log DIAGNOSTICS Clear Error Log Unit 4: Printer Configuration DIAGNOSTICS MODE (TABLE 4-15) DESCRIPTION Allows varification of proper printer operation and print quality through the selection of various test print options. • Checkerboard - factory default. Helps identify marginal print head elements, edge sharpness, and uneven print quality. • Grey - helps identify burned out print head elements and uneven print quality. • Grid - helps identify edge sharpness and uneven print quality. • Current Config. - prints the current printer configuration and helps determine text print quality. • Left Test - prints a pattern containg a series of ladder-type bar code symbols starting with four and decrementing by one symbol on each print until a single symbol prints on the left side. • Right Test - prints a pattern containg a series of ladder-type bar code symbols starting with four and decrementing by one symbol on each print until a single symbol prints on the right side. • Combo Test - prints a combined left and right side test. • Ethernet Test - prints the NIC statistics stored on its adapter. Only appears if the Network Interface Card (NIC) adapter is installed. • Barcode Demo - prints text and barcodes with the barcodes positioned at the left and right margins of the standard label media suplied with the printer. The test automatically produces output for 4 inch printers at 203 and 305 dpi. • RFID Report - prints a report of RFID statistics since the printer was powered on or since the last data reset. Once the desired test pattern is chosen, press ENTER t ostart printing. If the Test Count option is set to Continuous (factory default), press ENTER again to stop printing. Only appears if the RFID encoder is installed. This menu screen enables the quantity of times the selected test pattern will be printed. The options are Continuous (factory default), 1 Page, 2 Pages, 5 Pages, and 10 Pages. This menu screen allows the entry of the reference number which includes toe program file part number and the revision number of the software installed in the printer (e.g., 358186 V1.07G). Allows the determination of whether printer will print a label containing data sent from the host in hexadecimal format. • Disable - factory default. Will not print. • Enable - will print. This menu screen permits the printing of the current log of errors. Most non-routine faults (Ribbon Fault, Print Head Hot) are stored in the error log. Is a subset of menu screens that permits the error log to be cleared. GL408-412e Operator Manual 4-83 PN: 9001163A