Oki GL408e GL408e/GL412e User's Guide - Page 83

MENU TOF Action Reset* Offline Process Disable* MENU INTERFACES Unit 4: Printer Configuration PARALLEL INTERFACE MODE (TABLE 4-5) DESCRIPTION Top-Of-Form Action. When enabled, the printer will feed out the job in process when the prime signal is activated through the parallel interface. If disabled, the job in process may be aborted. Allows determination of whether the printer will process data while offline. • Disable - factory default. The printer does not process parallel/network data while offline. • Enable - the printer continues to process (but not print) the current network/parallel job while the printer is offline until the printer's buffer is full. CENTRONICS INTERFACE MODE (TABLE 4-6) DESCRIPTION Permits entry into the INTERFACES Mode. INTERFACES Ignore CR/LF Item No. Check BCC Check History Buffer Comm. Protocol Host Interface Parallel Port USB Port Serial Port Printer Mgmt Ignore CR/LF No* Item No. Check Disable* Is the menu selection screen for the INTERFACES Mode. Determines whether the print data code will be deleted. Hexadecimal graphic data will not be deleted. • No - factory default. Will not be deleted. • Yes - will delete all carriage returns (CR) and line feed (LF) commands in the data stream - including graphics and 2D barcodes. This menu screen is only available when Status 5 is selected for Bi-Com interface. Determines how the printer will react if the item number (ID Command) is set to be processed by the printer. • Disable - factory default. Does nothing regardless of whether the item number is included in the format. • Cancel - errors when the incorrect item number is being accessed. When the printer is brought back online from the error, by pressing the Line key, the incorrect job is canceled. • Resume - error when the incorrect item number is being accessed. When the printer is brought back online from the error, by pressing the Line key, the incorrect job is canceled. GL408-412e Operator Manual 4-47 PN: 9001163A