Oki MC780f MC770/780 User Guide - Advanced - Page 155

Setting the initial setup You can set the initial settings for the fax functions. 1 Press [INITIAL SETUP]. 2 Set each option, and then press [OK]. Memo • Setting these items may not be required since they may not be displayed on the screen (it depends on your country or region). Press or to switch the pages. SETTING ITEMS RX MODE Set the fax reception mode. AUTO: This equipment receives an incoming fax automatically. 1 MANUAL: This equipment receives an incoming fax manually. TEL/FAX: Switches between phone call and FAX automatically when there is an incoming call. The call count setting screen is displayed. Set the call count (1 to 15). 2 Memo • To receive a fax in the manual mode, an external telephone is required. MONITOR VOLUME / COMPLETION TONE VOLUME Monitor tone volume (line tone when on-hook) and Reception completion tone volume (You hear this tone 3 when reception is completed). Each volume can be set in 8 levels (0: tone Off). DIAL TYPE There are 2 types of telephone lines. When you first install this equipment or you change the connected telephone line, set this according to the telephone line type. DP: Dial pulse lines. 4 MF: Multi frequency lines. Memo • Dial type setting is not required depending on the country or region. 5 Setting RX printing You can set up options to print a received fax. Memo • In the Administrator's Function List, you can view the status of the options. For details of the operation to print the list, refer to the "Setting Items/Printing" ( P.229). 6 1 Press [RX PRINT]. 7 - 155 -