Oki MC780f MC770/780 User Guide - Advanced - Page 295

[DYNAMIC WEP] - Select this to use an encryption which automatically updates the WEP key. DYNAMIC WEP does so periodically as well as automatically. Note • To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X]. Memo • The encryption intensity between each encryption is: AES(CCMP) > TKIP > DYNAMIC WEP 7 Specify the following items and press [NEXT]. • TRANSMIT POWER Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%]. 8 Confirm the settings and press [FINISH]. SETTING ITEMS (ADMIN) 9 Press [YES], and wait until the setting is reflected. 1 2 Selecting WPA/WPA2/802.1X security mode with PEAP protocol Using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the equipment. This 3 equipment uses the user name and password to authenticate the access rights to the wireless network, and the RADIUS server authenticate this equipment using the CA certification file. Note • When using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the 4 equipment using TopAccess first. For instructions on how to install the CA certification using TopAccess, refer to TopAccess Guide. 1 Press [WPA], [WPA2] or [802.1X], and then [NEXT]. 5 Memo • If you want to change the settings, press [PREV] to move back to the screen that you want to change and then repeat the operation. 6 The AUTHENTICATION SETTINGS screen is displayed. Note • To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X]. 7 - 295 -