Oki MC780f MC770/780 User Guide - Advanced - Page 294
Press [WPA], [WPA2] or [802.1X], and then, Press [DISABLE] and press [EAP USER
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
SETTING ITEMS (ADMIN) Note • When using the WPA/WPA2/802.1X with the EAP-TLS protocol, you must install the CA certification file and user 1 certification file in the equipment using TopAccess first. For instructions on how to install the CA certification and user certification files using TopAccess, refer to TopAccess Guide. 1 Press [WPA], [WPA2] or [802.1X], and then [NEXT]. 2 Note • Press [ENABLE] to use the user name from Common Name in the User Certificate. 4 Enter the EAP user name using the keyboard and digital keys and press [OK]. 3 The AUTHENTICATION SETTINGS screen is displayed. Note • To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press [802.1X]. 2 4 Press [EAP-TLS] and press [NEXT]. The screen returns to the WIRELESS AUTHENTICATION (EAP-TLS) screen. 5 Press [NEXT]. The WIRELESS ENCRYPTION SETTINGS screen is displayed. 5 6 Specify the following items and press [NEXT]. The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed. 3 6 Press [DISABLE] and press [EAP USER NAME]. 7 The letter entry screen is displayed. • ENCRYPTION BETWEEN AP AND STA. Select the encryption type that is used for the communication between Access Point and this equipment. [TKIP] - Select this to use TKIP encryption. TKIP provides a different key for per packet with a message integrity check. This key will be changed for every fixed interval. [AES(CCMP)] - Select this to use AES encryption. AES is the next-generation cryptography algorithm that the U.S. government improves to replace the DES and 3DES. - 294 -