Oki MC780f MC770/780 User Guide - Advanced - Page 93
Mirror image / Negative/positive reversal, control panel.
![]() |
View all Oki MC780f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5 Read the following 4 values to specify the area using the left and top scales on the original glass. X1: From the top left to the left edge of the selected area X2: From the top left to the right edge of the selected area Y1: From the top left to the upper edge of the selected area Y2: From the top left to the lower edge of the selected area Note that the marks of the original scales have a 2 mm (0.08") pitch. EDITING FUNCTIONS 8 Select other copy modes as required, and then press the [START] button on the control panel. 1 Mirror image / Negative/positive reversal You can reverse an image like a mirror (mirror image), or you can reverse light-and-dark of an image (negative/positive reversal). Mirror image 2 3 Negative/Positive reversal 6 Key in the read values. 1) Press [X1], [X2], [Y1] and [Y2], and then key in the read values correspondingly. 2) You can specify up to 4 areas on 1 page. When you want to specify more than one area, press [AREA 1] to [AREA 4] to switch the area, and then key in the values correspondingly. 3) Press [OK] after you have specified all the areas. 7 Place the original again on the original glass with its face down. Place it with its bottom right to you. Align its top side against the left side of the original glass. 4 Note • Negative/positive reversal is available only when BLACK or FULL COLOR is selected as a color mode. 1 Place paper in the tray(s). 5 When using bypass copying, be sure to set the paper size. 2 Place the original(s). 3 Press [EDITING] on the EDIT menu. 6 7 - 93 -
![](/manual_guide/products/oki-data-mc770-mc770780-user-guide-advanced-7299944/93.png)