Panasonic KX-P3696 Operating Instructions - Page 58

0 0 Power requirements: Frequency: Current: Interface: Print fonts: Software emulation: Buffer: Character sets: Dot configuration: Refer to the nameplate located on the rear of the printer. Centronics parallel RS-232C/Serial interface board [KX-PS14, KX-PS13] (option) 3 Draft (Pica, Elite, Micron) 6 Near Letter Quality (Roman, Sans Serif, Courier, Prestige, Script, Bold PS) Epson FX-1170 IBM Proprinter IIIXL 13K (standard), additional 32K (optional KX-P44) 96 ASCII characters, 96 Italic ASCII characters, 33 International characters-14 countries & LEGAL Set 38 Multilingual characters, 158 IBM-PC special characters 1/84 inch (0.3 mm) dot diameter Draft Matrix (Hor.xVer.) 9x9 NLQ 18x18 Dot pitch (Hor.) (Ver.) 1/ 120" (0.21 mm) 1/ 72" (0.35 mm) 17240" (0.11 mm) 1/ 144" (0.18 mm) Maximum number of characters per line (cpl): Font Print line size: 8" / 13.6" Pica [10 cpi (character per inch)] 80 / 136 cpl Elite (12 cpi) 96 / 163 cpl Micron (15 cpi) 120 / 204 cpl Compressed (17 cpi) 137 / 233 cpl Elite compressed (20 cpi) 160 / 272 cpl Pica elongated (5 cpi) 40/ 68 cpl Elite elongated (6 cpi) 48 / 81 cpl Micron elongated (7.5 cpi) 60 / 102 cpl Compressed elongated (8.5 cpi) 68 / 116 cpl Elite compressed elongated (10 cpi) 80 / 136 cpl Printing speed [characters per second (cps)]: Draft NLQ Micron 500 cps 67 cps Elite 400 cps 80 cps Pica 333 cps 67 cps mm Printing direction: a: Line feed time: x Paper feed: Uni-directional / Bi-directional (user selectable) Approx. 76 msec [with 1A inch (4.2 mm) line feeding] Push/Pull (user selectable) tractor feed (with fanfold paper) Friction feed (with single sheets or envelopes) Noise level: Less than 55 dB(A) in Normal Mode Less than 52 dB(A) in Quiet Mode (Continued) 58