Pfaff creative 1467 Owner's Manual - Page 168

Overcasting with zigzag stitch prog -.- cci r;i 10 -'" ''- 3-5 0 Stitch-width: as required Sewing thread: Embroidery/darning thread or sewing thread The stored zigzag-stitch is suitable for serging of light materials. The heavier the material, the wider the stitch width must be selected for the zigzag stitch. Ensure that the needle passes over the fabric edge during sewing. In this way the material edge is properly serged and well covered (Fig. 1>. For heavy or easily fraying materials, use: • Program: 16 or 09 (Fig. 3). 1 Overcasting with overlock foot For materials which contract during serging use the overlock foot. L11prog (ci '-" I I - J 35 - 3 Stitch-width: as required Serge the raw edge with the required zigzag stitch. The material enters at the red marking on the sewing foot (Fig. 2). • Preparation of the sewing foot (overlock foot No. 3) Turn screw 'A" fully to the front. The red mark "B" is then on the right sewing foot side. Allow the edge of the material to be sewn to enter close 2 against the red mark. During sewing, the thread is placed over the wire "C". By this means you will receive a beautiful smooth seam (Fig. 2). For change of needle position for zigzag stitch see page 79.