Pfaff creative 1467 Owner's Manual - Page 176
start
View all Pfaff creative 1467 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Blind stitch Fold the previously overcast raw edge over to form a hem of the desired width and baste about 0.5 cm from the fabric edge. Place the fabric under the blindstitch foot and sew, making sure the folded fabric edge runs along edge guide "B" of the blindstitch toot (Fig. 1 + 2a). Before you start blindstitching, adjust the needle penetration point on the folded fabric edge. To do this, adjust the position of edge guide "B" by turning regulating screw 'A' so that the needle catches only one thread in the folded edge when it makes its left stitch. Sew a trial seam on a piece of scrap material first. • Then proceed as described above (Fig. 2) Blind stitch (for elastic materials) I', ro i 06 -- -3+ 3 Program 06 is suitable for stretch fabrics. First fold the hem to the desired width and baste. Adjust the needle position as described above. Now you can sew the hem (Fig. 2b). • Follow the instructions given above, 2 / 2a 2b n7