Pfaff creative 1467 Owner's Manual - Page 47

q --, !; 'k Border 1 prog c1 1j 04 31 43 -3+ 2 Begin by tracing the pattern on a piece of paper, then transfer it onto the fabric. First workstep, stems • Select program 04 and sew along the traced lines. Second workstep, leaves • Select program 43 • Stitch width 4.5 mm • Pattern lengths 12 - 10- 9.0- 8.0 (key 124) • Sew the leaves, starting at the stem. Third workstep, flowers • Select program 31 • Press "needle down" key The flowers are produced by turning the fabric. Sew the programmed stitch pattern until the needle stops down in the material. Turn the fabric through 90. Repeat this process three times. Fourth workstep, flower centre • Select program 43 • Stitch width 5,0 mm • Stitch length 0.25 mm • Pattern length 5.0 (key 124) Sew the programmed stitch pattern in the middle, as illustrated. Fifth workstep, bud centre • Select program 43 • Stitch width 2.5 mm • Stitch length 0.25 mm • Pattern length 3.0 (key 124) Sew the programmed stitch pattern, as illustra ted. Border 2 First workstep, centre motif • Select program 36 Sew the programmed stitch pattern. Second workstep, heart motif • Select program 30 Sew the programmed stitch pattern with the right edge of the sewing foot running along the centre motif. 2 43