Ricoh 3035 Scanner Reference - Page 114
Wait Time for Next Originals: SADF, Original Setting, Switch to Batch, Mixed Original Sizes Priority
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Initial Scanner Setup ❖ Wait Time for Next Original(s): SADF When dividing originals and scanning them separately with the ADF to form a single file, select [Set Wait Time] or [Continuous Wait] for the waiting status. 9 106 Note ❒ This setting is valid if [SADF] is specified for [Original Feed Type] when scanning. For details, see p.80 "Batch/SADF selection". ❒ If [Set Wait Time] is selected, enter the wait time in seconds (3999) for placing additional originals with the number keys. Scanning will start automatically if additional originals are placed within this time. You can end scanning and begin transmission by pressing the {#} key within this time. Once the specified time has elapsed, transmission starts automatically. ❒ If [Continuous Wait] is selected, the machine will wait for the additional originals until the {#} key is pressed. Scanning will start when additional originals are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {#} key. ❒ Even if originals are placed on the exposure glass, the machine will operate according to the specified settings. However, every time originals are placed on the exposure glass, you must press the {Start} key to start scanning. ❒ If a paper misfeed occurs or any of the following operations is performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {#} key is pressed. • Changing the settings such as the scan settings • Opening the upper cover of the ADF • Pressing the {Interrupt} key to activate the copy mode ❖ Original Setting Set the default for whether originals are one-sided or two-sided and if two-sided, the relationship between those sides. When the originals are always the same, set this for the default to make operation easier. You can select [1 Sided Original], [2 Sided Orig.: T to T] (Top to Top), or [2 Sided Orig.: T to B] (Top to Bottom). Reference p.79 "Making the Settings Related to the Orientation of the Original and Scanned Sides" ❖ Switch to Batch Select [SADF] or [Batch] as the scanning mode that appears as [Original Feed Type] in the initial display of the scanner mode. Reference p.82 "Scanning Originals in Several Times" ❖ Mixed Original Sizes Priority This setting determines whether the original size is to be automatically detected when originals of different sizes are inserted in the ADF. You can select [On] or [Off]. Note ❒ If the original size is specified when scanning, this setting is ignored.