Ricoh 3035 Scanner Reference - Page 46
Prev., Clear/Stop, Change, Check, Modes, Enter Destination, User Name, Manual Input, Bindery
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Sending Scan Files by Scan to Folder M Check the connection test result, and then press [Exit]. N Press [OK]. O To enter more destinations, repeat steps A to N. Note ❒ To deselect a destination, press [UPrev.] or [TNext] to display the destination in the 3 destination field, and then press the {Clear/Stop} key. ❒ To change the path for the folder that has been entered, press [Change] on the left side of the destination field. Enter the correct path for the folder, and then press [OK]. ❒ To check the selected destinations, press the {Check Modes} key. Directly enter the path for the folder in the NDS tree or on the NetWare server A Press [Enter Destination]. B Press [NCP]. Note ❒ If you try to switch to a pro- tocol from one for which [Path], [User Name] or [Password] is specified, a message asking you to confirm the protocol change appears. 38 C Select "Connection Type". To specify the NDS tree name, press [NDS]. To specify the NetWare server name, press [Bindery]. D Press [Manual Input] on the right side of the path field. The soft keyboard appears. E Enter the path for the folder. Note ❒ If you set "Connection Type" to [NDS], the NDS tree name is "tree", the name of the context including the volume is "context", the volume name is "volume", and the folder name is "folder", the path will be "\\tree\volume.context\folder". ❒ If you set "Connection Type" to [Bindery], the NetWare server name is "server", the volume name is "volume", and the folder name is "folder", the path will be "\\server\volume\folder". ❒ For details about the maximum number of characters that can be entered, see p.123 "Scan to Folder". F Press [OK]. G Enter the user name for logging on to the NDS tree or NetWare server. Press [Manual Input] to the right of the user name field. The soft keyboard appears.