Ricoh 3035 Scanner Reference - Page 47
Manual Input, Connection Test, Cancel, Prev., Clear/Stop, Change, Check, Modes, Enter Destination, User Name, Browse Network
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Note ❒ If you press [NDS] for "Con- nection Type", enter the user name, and then enter the name of the context containing the user object. If the user name is "user" and the name of the Context is "context", the user name will be "user.context". Reference For details about the maximum number of characters that can be entered, see p.123 "Scan to Folder". H If a password is required for logging on, enter it. Press [Manual Input] to the right of the password field. The soft keyboard appears. I Press [Connection Test]. A connection test checks the specified shared folder exists. Note ❒ You cannot connect to fold- ers you are not allowed to read. ❒ The connection test may take time. ❒ You may not be able to press [Connection Test] right after pressing [Cancel] during a connection test. ❒ Even if the connection test was successful, the machine may fail to transfer the file if you do not have write privileges for the file or there is not enough free hard disk space. J Check the connection test result, and then press [Exit]. K Press [OK]. Sending Scan Files by Scan to Folder L To enter more destinations, repeat steps A to K. Note ❒ To deselect a destination, press [UPrev.] or [TNext] until the destination appears in the destination field, and then press the {Clear/Stop} key. ❒ To change the path for an entered folder, press [Change] 3 on the left side of the destina- tion field. Enter the correct path for the folder, and then press [OK]. ❒ To check the selected destinaions, press the {CheckModes} key. Select a folder on a network computer A Press [Enter Destination]. B Press [SMB]. Note ❒ If you try to switch to a pro- tocol from one for which [Path], [User Name] or [Password] is specified, a message asking you to confirm the protocol change appears. C Press [Browse Network] on the right side of the path field. The list of client computers on the same network appears. 39