Ricoh 3035 Scanner Reference - Page 45
User Name, Manual Input, System Settings, Change, Connection Test, Cancel, on the right
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Note ❒ If you try to switch to a pro- tocol from one for which [Path], [User Name] or [Password] is specified, a message asking you to confirm the protocol change appears. C Press [Manual Input] on the right side of the server name field. The soft keyboard appears. D Enter a server name. Note ❒ For details about the maxi- mum number of characters that can be entered, see p.123 "Scan to Folder". ❒ An IP address also can be entered. E Press [OK]. F Press [Manual Input] on the right side of the path field. The soft keyboard appears. G Enter the path for the folder. Note ❒ For details about the maxi- mum number of characters that can be entered, see p.123 "Scan to Folder". ❒ The following is an example of a path where the folder name is "user" and the subfolder name is "lib": user\lib H Press [OK]. Sending Scan Files by Scan to Folder I Enter the user name according to the setting at the destination. Press [Manual Input] to the right of the user name field to display the soft keyboard. Reference For details about the maxi- mum number of characters that can be entered, see p.123 "Scan to Folder". 3 J Enter the password according to the setting at the destination. Press [Manual Input] for [Password] to display the soft keyboard. K To change the port number which is set in [System Settings], press [Change] on the right side of the port number field. Enter a port number using the number keys, and then press the {#}key. L Press [Connection Test]. A connection test is performed to check whether the specified shared folder exists. Note ❒ The connection test may take time. ❒ You may not be able to press [Connection Test] right after pressing [Cancel] during a connection test. 37