Ricoh 3035 Scanner Reference - Page 44
Manual Input, Connection Test, Cancel, Prev., Clear/Stop, Change, Check, Modes, Enter Destination
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Sending Scan Files by Scan to Folder ❒ Computer and shared folder names consisting of more than 12 characters cannot be displayed. E Press [OK]. F Enter the user name according to the setting at the destination. Press [Manual Input] to the right of the user name field to display 3 the soft keyboard. Reference For details about the maximum number of characters that can be entered, see p.123 "Scan to Folder". G Enter the password according to the setting at the destination. Press [Manual Input] for [Password] to display the soft keyboard. H Press [Connection Test]. A connection test is performed to check whether the specified shared folder exists. Note ❒ The connection test may take time. ❒ You may not be able to press [Connection Test] right after pressing [Cancel] during a connection test. ❒ Though the connection test was successful, the machine may fail to transfer the file if writing authority is lacking or if there is not enough free space on the hard disk. I Check the connection test result, and then press [Exit]. J Press [OK]. K To enter more destinations, repeat steps A to J. Note ❒ To deselect a destination, press [UPrev.] or [TNext] to display the destination in the destination field, and then press the {Clear/Stop} key. ❒ To change the path for the folder that has been entered, press [Change] on the left side of the destination field. Enter the correct path for the folder, and then press [OK]. ❒ To check the selected destinations, press the {Check Modes} key. Directly enter the path for the folder on the FTP server A Press [Enter Destination]. B Press [FTP]. 36