Ricoh 5510L Operating Instructions - Page 30

Getting Started • Type2 5. {Transmission Mode} key Press to select the level of detail Press this key to switch between Memory (Standard, Detail, Super Fine, Extra Super Fine or 300dpi) to be sent. 300dpi can be selected only with Transmission and Immediate Transmission modes. 1 the scanner function of Type2 and 6. Display Type1 with the optional NIC FAX Unit. This guides you through tasks and informs you of the machine status. Messag- es appear here. 7. Alarm Indicators Note ❒ When receiving fax messages or copying with Extra Super Fine, Optional 40MB Memory Card is required. 4. User Function keys Each of these can be programmed for rapid access to frequently used functions. ❖ Functions Programmed by Default ❖ Type1 Key Function F1 Print Journal F2 FAX Header Print F3 Stamp F4 Group Dial ❖ Type2 and Type1 with the optional NIC FAX Unit Key Function F1 Print Journal F2 FAX Header Print F3 Stamp F4 Group Dial F5 Internet Fax F10 Scanner ❖ MCover Open Warning Indicator Lights if a cover is open. Make sure all covers are firmly closed. ❖ xPaper Jammed Indicator Lights if paper is jammed. Remove the jammed paper as instructed on the display. See p.110 "Clearing Paper Jams" and p.261 "Clearing a Paper Jam in the Optional Paper Supply Units", . ❖ DAdd Toner Indicator Blinks when toner is low and lights when toner has completely run out. See p.113 "Replacing the Toner Cartridge". ❖ LCall Service Indicator Lights to indicate when the machine has broken down. If lit, please contact your service representative. 8. Status Indicators These indicators display the current status of the unit. ❖ mData-in Indicator When the optional Printer Interface is installed, this indicator blinks when the machine is receiving data from a computer. When lit, the machine is waiting for data from a computer. ❖ Communicating Indicator Lights during reception or transmission. 22