Ricoh 5510L Operating Instructions - Page 86
Press the, key to, select line., Press, Enter the name.
View all Ricoh 5510L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Programming Note ❒ If a fax number is already programmed in this Speed Dial, the number is shown on the display. If you want to change the fax number, press the {Clear} key and enter another number. Selecting the line A Press the {Line Selection} key to select line. ❒ You cannot omit the fax number. Be sure to program it. 3 ❒ When the Optional ISDN Unit or the Optional Extra G3 Inter- Note face Unit is installed, you can ❒ Select G3, G4 or PABX. select which line to use (G3 or G4) before entering the fax number. ❒ When the Optional Extra G3 Interface Unit or the Optional ISDN Unit is installed, you ❒ If you make a mistake, press the can select the line type for G3 {Clear} key or the {Stop} key by pressing the User Func- and try again. The {Clear} key tion key ({F1} to {F10}) in deletes one character at a time, which the Line Selection and the {Stop} key deletes the function is assigned. See whole line. p.154 "User Function Keys", ❒ You can use "Redial" when . G specifying the destination. See p.77 "Redial", . ❒ To enter "-", press the {Pause/Redial} key. ❒ If you want to program SUB, SEP, SID, PWD, Sub-address, and UUI, program them in this step. See p.78 "SUB/SID (SUB Code Transmission)", , p.80 "SEP/PWD (SEP Code Polling Transmission)", , p.82 "Sub-address", and p.83 "UUI", . H Enter the name. 78