Ricoh SP 213Nw User Guide - Page 21
Configuring the Ad hoc mode using Smart Organizing Monitor, In Ad Hoc mode
View all Ricoh SP 213Nw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Configuring Network Settings Configuring the Ad hoc mode using Smart Organizing Monitor • In Ad Hoc network, every device must be manually assigned an IP address for TCP/IP if there is no DHCP server. • In Ad Hoc mode, only Open System or WEP encryption is supported. WPA2-PSK and Mix Mode WPA2/WPA authentication methods are not supported. 1. On the [Start] menu, click [All Programs]. 2. Click [Smart Organizing Monitor for SP xxx Series]. 3. Click [Smart Organizing Monitor Status]. If the machine you are using is not selected, click [Connect Printer], and then select the machine's model. 4. Click the [User Tools] tab. 5. Click [Printer Configuration]. 6. Enter the access code, and then click [OK]. The default access code is "Admin". Enter "Admin" if it has not been changed. Case is significant. 7. On the [Network 1] tab, set [Wireless Function:] to [Active]. 8. On the [Wireless] tab, set [Manual Setup] to [Configuration Method]. 9. In [SSID], enter the SSID in [Wireless LAN Setting]. 10. Set [Communication Mode] to [Ad-Hoc]. 11. In the [Ad-Hoc Channel] box, select the channel number. 12. In the [Authentication] box, select the authentication method. 13. In the [Encryption] box, select the encryption method. 14. In the [WEP Key Length] box, select [64 bit] or [128 bit]. 15. In the [WEP Transmit Key ID] box, select the ID. 16. In the [WEP Key Format] box, select [Hexadecimal] or [ASCII]. 17. In [WEP Key], enter the password. 18. Click [OK]. 19. Click [Close]. 20. Press the [Wi-Fi] key. 21. Check the result. Connection has succeeded: The [Wi-Fi] key changes from flashing to continuous lighting. 19