Samsung CLP 660ND User Manual (ENGLISH) - Page 25
Supported operating systems, Configuring network protocol via the machine - troubleshooting
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Supported operating systems The following table shows the network environments supported by the machine: Item Requirements Network interface 10/100 Base-TX Network operating system Windows 2000/XP/2003/Vista Various Linux OS Macintosh 10.3 ~ 10.5 (CLP-610 series) Macintosh 10.1 ~ 10.5 (CLP-660 series) Network protocols TCP/IP Dynamic addressing DHCP, BOOTP server Configuring network protocol via the machine You can set up TCP/IP Network parameters, follow the steps listed below. Note If you want to setup DHCP network protocol, go to the http:// developer.apple.com/networking/bonjour/download/, select the program Bonjour for Windows due to your computer operating system, and install the program. This program will allow you to fix the network parameter automatically. Follow the instruction in the installation window. This program does not support Linux. 1 Make sure your machine is connected to the network with an RJ-45 Ethernet cable. 2 Make sure you have turned on the machine. 3 Press Menu on the control panel, until you see Network on the bottom line of the display. 4 Press OK to access the menu. 5 Press the left/right arrow until TCP/IP displays. 6 Press OK. 7 Press the left/right arrow until Static displays. 8 Press OK. 9 Press the left/right arrow until IP Address displays. 10 Press OK. 11 Enter IP address. a.Press the left/right arrow to enter a number between 0 and 255. b.Press OK. c.Repeat these steps to complete the address. 12 Press Back to go to the upper level. 13 Press the left/right arrow until Subnet Mask displays. 14 Press OK. 15 Enter Subnet Mask. a.Press the left/right arrow to enter a number between 0 and 255. b.Press OK. c.Repeat these steps to complete Subnet Mask. 16 Press Back to go to the upper level. 17 Press the left/right arrow until Gateway displays. 18 Press OK. 19 Enter Gateway. a.Press the left/right arrow to enter a number between 0 and 255. b.Press OK. c.Repeat these steps to complete Gateway. Note Contact the network administrator if you are not sure how to configure. Note You can also set up the network settings through the network administration programs. Refer to the user's guide on the Network Utilities CD that came with your machine. • SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of manageing network devices and lets you remotely monitor and troubleshoot network machines from any sith with corporate internet access. Download this program from http://solution.samsungprinter.com. • SyncThru™ Web Service: Web server embedded on your network print server, which allows you to: - Configure the network parameters necessary for the machine to connect to various network environments. - Customize machine settings. • SetIP: Utility program allowing you to select a network interface and manually configure the IP addresses for use with the TCP/ IP protocol. See Using SetIP program on page 3.5. 3.2