Samsung CLP 660ND User Manual (ENGLISH) - Page 52
Low Heat Error, Press Stop Key - manual feed how to
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Message Duplex Jam 0 Check Inside Fuser Fan Locked Install Transfer Belt Install Toner Invalid Toner Invalid Transfer Belt IP Conflict Load Manually Press Stop Key Load [xxx] In [yyy] Explanation Paper has jammed during duplex printing. This is applicable only to machines with this feature. There is a problem with the fan for the fuser unit. The transfer belt is not installed. The toner cartridge is installed improperly, or not installed. The toner cartridge which the arrow indicates is not suitable for your machine. The transfer belt is not suitable for your machine. The network IP address you have set is being used by someone else. The multi-purpose tray is empty in manual feed mode. There is no corresponding paper in the corresponding tray. Solution Clear the jam. (Page 7.1) Cycle power. If the problem persists, contact the service representatives. Install a Samsunggenuine transfer belt. (Page 8.1, Page 6.6) Reinstall the toner cartridge two or three times to confirm it is seated properly. If the problem persists, the toner cartridge is not being detected. Contact the service representatives. Install the corresponding toner cartridge with a Samsung-genuine cartridge. (Page 6.4) Reinstall the transfer belt two or three times to confirm it is seated properly. Make sure that the transfer belt is Samsung-genuine product. If the problem persists, contact the service representatives. Check the IP address and reset it if necessary. (Page 3.2) Load paper in the multi-purpose tray. (Page 4.6) Load corresponding paper in the corresponding tray. (Page 4.4) Message Low Heat Error Cycle Power OPC Motor Locked MP Tray Paper Jam 0 New Fuser Error Non SAMSUNG Toner Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside Explanation Solution The fuser unit is lowheated. Cycle power. If the problem persists, contact the service representatives. There is a problem with the main motor for the machine. Cycle power. If the problem persists, contact the service representatives. Paper has jammed in the multi-purpose tray. Clear the jam. (Page 7.3) The problem has occurred in the newly installed fuser unit. Cycle power. If the problem persists, contact the service representatives. The toner cartridge which the arrow indicates is not a Samsung-genuine cartridge. Stop You can select either Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as if Stop is selected. Replace the corresponding toner cartridge with a Samsung-genuine cartridge. (Page 6.4) Paper has jammed in the paper feed area and inside the machine. Clear the jam. (Page 7.1) Paper has jammed Clear the jam. inside the machine. (Page 7.1) Special print media has jammed in the paper exit area. Clear the jam. (Page 7.5) 7.8