Samsung CLP 660ND User Manual (ENGLISH) - Page 41
Replacing the toner cartridge, which individual toner cartridge should be replaced. - black toner
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine. Caution If you open the front door, be careful not to touch the underneath of the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be high and could damage your skin. Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. 4 Slide the toner cartridge back into the machine. 5 Close the front cover. Make sure the cover is securely latched. Caution If the front cover is not completely closed, the machine will not operate. Replacing the toner cartridge The machine uses four colors and has a different toner cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K). • The status LED and the toner-related message on the display indicate which individual toner cartridge should be replaced. At this stage, the toner cartridge needs to be replaced. Check the type of toner cartridge for your machine. (See "Supplies" on page 8.1.) 1 Turn the machine off, then wait a few minutes for the machine to cool. 2 Using the handle, completely open the front cover. Note When you open the front door and work inside the machine, it is highly recommend that you remove the paper transfer belt first. Because the work you do could contaminate the paper transfer belt. 3 Holding both handles on the toner cartridge, thoroughly rock it from side to side to redistribute the toner. Caution • Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area. • Be careful not to scratch the surface of the paper transfer belt. • If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason. 6.4