Samsung CLP 660ND User Manual (ENGLISH) - Page 42

the paper covering the toner cartridge by removing the tape., If toner gets on your clothing - toner cartridges

Get Samsung CLP 660ND - Color Laser Printer PDF manuals and user guides
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

3 Grasp the handles on the empty toner cartridge and pull to remove the cartridge from the machine. Caution • Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge. • To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 5 Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner. Caution If you open the front door, be careful not to touch the underneath of the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be high and could damage your skin. Note When you open the front door and work inside the machine, it is highly recommend that you remove the paper transfer belt first. Because the work you do could contaminate the paper transfer belt. 4 Take a new toner cartridge out of its package. 6 Place the toner cartridge on a flat surface, as shown, and remove the paper covering the toner cartridge by removing the tape. Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. 7 Make sure the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place. 8 Close the front cover. Make sure the cover is securely latched, and then turn the machine on. Caution If the front cover is not completely closed, the machine will not operate. 6.5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
6
.5
<
Maintenance>
3
Grasp the handles on the empty toner cartridge and pull to remove
the cartridge from the machine.
Caution
If you open the front door, be careful not to touch the
underneath of the control panel (the lower part of the fuser unit).
The temperature of the fuser unit might be high and could
damage your skin.
Note
When you open the front door and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer
belt.
4
Take a new toner cartridge out of its package.
Caution
•
Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
•
To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5
Holding both handles on the toner cartridge, thoroughly rock it from
side to side to evenly distribute the toner.
6
Place the toner cartridge on a flat surface, as shown, and remove
the paper covering the toner cartridge by removing the tape.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash it in cold water. Hot water sets toner into fabric.
7
Make sure the color of the toner cartridge matches the color slot and
then grasp the handles on the toner cartridge. Insert the cartridge
until it clicks into place.
8
Close the front cover. Make sure the cover is securely latched, and
then turn the machine on.
Caution
If the front cover is not completely closed, the machine will not
operate.