Samsung CLP 660ND User Manual (ENGLISH) - Page 48
In the fuser unit area, Troubleshooting> - transfer belt
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
9 Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. In the fuser unit area If paper is jammed in the fuser unit area, follow the next steps to release the jammed paper. 1 Open the top cover. Caution • Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area. • Be careful not to scratch the surface of the paper transfer belt. • If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason. 10 Close the front cover firmly. The machine will resume printing. Caution If the front cover is not completely closed, the machine will not operate. 2 Open the inner cover using the handle on it. Caution Do not touch the fuser inside the inner cover. It is hot and could cause burns! The fuser's operating temperature is 180°C (356°F). Take care when removing paper from the machine. 7.4