Samsung CLP 660ND User Manual (ENGLISH) - Page 27
Printer's basic settings, Altitude Setting after Software Installation, Changing the display language
UPC - 635753720570
View all Samsung CLP 660ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Note •If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section. •When the printer driver is in installation process, the driver installer detects the locale information of your operating system, and sets the default paper size for your machine. If you use the different Windows locale, you must change the paper size of your machine for matching your commonly used paper size. Go to the printer properties to change the paper size after installation completes. Printer's basic settings After installation is complete, you may want to set the printer's default settings. Refer to the next section if you would like to set or change values. Altitude Setting after Software Installation The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print. Before you set the altitude value, find the altitude where you are using the machine. Value 1 High 3 2 High 2 3 High 1 4 Normal 1 Ensure that you have installed the printer driver with the provided Printer Software CD. 2 Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. 3 Click Printer Setting. 4 Click Setting > Altitude Adjustment. Select the appropriate value from the dropdown list, and then click Apply. Note If your machine is connected to a network, SyncThru Web Service screen appears automatically. Click Printer Setting > Setup (or Machine Setup) > Altitude Adj. Select the appropriate altitude value, and then click Apply. Changing the display language To change the language that appears on the display, refer to the following steps. 1 Press Menu on the control panel until you see System Setup on the bottom line of the display. 2 Press OK to access System Setup. 3 Press the left/right arrow until Language displays. 4 Press OK. 5 Press the left/right arrow until the language you want displays. 6 Press OK. 7 Press Stop to return to machine ready mode. Setting job timeout 1 Press Menu on the control panel until you see System Setup on the bottom line of the display. 2 Press OK to access System Setup. 3 Press the left/right arrow until Job Timeout displays. 4 Press OK. 5 Press the left/right arrow to select the amount of time the machine will wait. 6 Press OK. 7 Press Stop to return to machine ready mode. 3.4