Home » Samsung Manuals » Laser Printers » Samsung CLP 660ND » Manual Viewer

Samsung CLP 660ND User Manual (ENGLISH) - Page 83

Installing mono printer driver, Select a Printer Port

UPC - 635753720570

Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Installing mono printer driver This printer features a monochrome-only printer. This mono driver limits output to the black toner, so you can use your printer as a monochrome printer. You must install the mono driver on your computer. Following steps guide you through the step by step installation process. 1 Make sure that the printer is connected to your computer and powered on. Or your computer and printer are connected to the network. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. 3 Click Cancel. 12 Click OK in the Install From Disk window. 13 Select a mono driver in the Printers field, and click Next. NOTE: If you have installed a mono driver before, then the Use Existing Driver window. Select as the window explains, and click Next. Also, depending on your computer configuration, the printer sharing window or the print the test page window may appear; make the appropriate selection. 14 Enter your printer name, and click Next. 15 Click Finish to start installing a mono printer driver. NOTE: If your printer is connected to a network, go to printer's Properties and select the Ports tab, then click Add Portand Standard TCP/IP Port, and create a new port to connect to the printer. To create a new port, follow the procedure laid out in the wizard window. If the confirmation window appears, click Finish. 4 Click Start →Printers and Faxes. 5 Select Add Printer. 6 When Add Printer Wizard appears, click Next. 7 Select Local printer attached to this computer, and Automatically detect and install my Plug and Play printer, then click Next. Go to step 13. If your computer does not find the printer, then follow the next step. 8 Select Next in the Select a Printer Port window. 9 In the Select a Printer Port window, select Have Disk.... 10 Click Browse to find a mono driver for your printer. ex) Windows XP 32 bit Select CD-ROM drive →Printer →PC_MONO → WINXP_2000_VISTA-32 11 Select ***.inf file and click Open. 12 Installing Printer Software in Windows

Section	Page
Contents	5
Introduction	13
Special features	13
Machine overview	14
Front view	14
Rear view	15
Control panel overview	16
Understanding the Status LED	17
Status LED with the toner cartridge messages	17
Understanding the menu map	18
Accessing menus	18
Menu overview	18
Description on each menu	19
Software overview	22
Supplied software	22
Printer driver features	22
System requirements	23
Getting Started	24
Setting up the hardware	24
Setting up the network	24
Supported operating systems	25
Configuring network protocol via the machine	25
Installing the software	26
Printer's basic settings	27
Altitude Setting after Software Installation	27
Changing the display language	27
Setting job timeout	27
Using power saving feature	28
Setting the default paper size and type	28
Setting the default tray	28
Changing the font setting	28
Using SetIP program	28
Selecting and loading print media	30
Selecting print media	30
Guidelines for selecting and storing print media	30
Specifications on print media	31
Media sizes supported in each mode	32
Guidelines for special print media	32
Loading paper	33
In the tray	33
In the multi-purpose tray	35
Setting the paper size and type	36
Basic printing	37
Printing a document	37
Canceling a print job	37
Maintenance	38
Printing a machine configuration report	38
Printing a network report	38
Monitoring the supplies' life	38
Cleaning your machine	38
Cleaning the outside	38
Cleaning the inside	38
Maintaining the cartridge	40
toner cartridge storage	40
Expected cartridge life	40
Redistributing toner	40
Replacing the toner cartridge	41
Replacing the paper transfer belt	43
Maintenance parts	44
Managing your machine from the website	44
Troubleshooting	45
Tips for avoiding paper jams	45
Clearing paper jams	45
In the paper feed area	45
In the multi-purpose tray	47
In the fuser unit area	48
In the paper exit area	49
In the optional tray	50
Understanding display messages	51
Solving other problems	54
Paper feeding problems	54
Printing problems	54
Printing quality problems	56
Common Windows problems	59
Common PostScript problems	59
Common Linux problems	60
Common Macintosh problems	60
Ordering supplies and accessories	61
Supplies	61
Accessories	61
How to purchase	61
Installing accessories	62
Precautions to take when installing accessories	62
Installing a memory module	62
Activating the added memory in the PS printer properties	63
Specifications	64
CLP-610 Series	64
CLP-660 Series	65
Glossary	67
Index	69
Software section	71
Software section Contents	72
Installing Printer Software in Windows	75
Installing Printer Software	75
Installing Software for Local Printing	75
Installing Software for Network Printing	78
Reinstalling Printer Software	81
Removing Printer Software	82
Installing mono printer driver	83
Basic Printing	84
Printing a Document	84
Printing to a file (PRN)	85
Printer Settings	85
Layout Tab	86
Paper Tab	86
Graphics Tab	87
Extras Tab	88
About Tab	89
Printer Tab	89
Using a Favorite Setting	89
Using Help	89
Advanced Printing	90
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	90
Printing Posters	91
Printing Booklets	91
Printing on Both Sides of Paper	92
Printing a Reduced or Enlarged Document	92
Fitting Your Document to a Selected Paper Size	92
Using Watermarks	93
Using an Existing Watermark	93
Creating a Watermark	93
Editing a Watermark	93
Deleting a Watermark	93
Using Overlays	94
What is an Overlay?	94
Creating a New Page Overlay	94
Using a Page Overlay	94
Deleting a Page Overlay	94
Using Windows PostScript Driver	95
Printer Settings	95
Advanced	95
Using Help	95
Sharing the Printer Locally	96
Setting Up a Host Computer	96
Setting Up a Client Computer	96
Using Smart Panel	97
Understanding Smart Panel	97
Opening the Troubleshooting Guide	98
Using Printer Settings Utility	98
Using Onscreen Help File	98
Changing the Smart Panel Program Settings	98
Using Your Printer in Linux	99
Getting Started	99
Installing the Unified Linux Driver	99
Installing the Unified Linux Driver	99
Uninstalling the Unified Linux Driver	100
Using the Unified Driver Configurator	101
Opening the Unified Driver Configurator	101
Printers Configuration	101
Ports Configuration	102
Configuring Printer Properties	102
Printing a Document	103
Printing from Applications	103
Printing Files	103
Using Your Printer with a Macintosh	104
Installing Software	104
Printer driver	104
Setting Up the Printer	105
For a Network-connected	105
For a USB-connected	105
Printing	106
Printing a Document	106
Changing Printer Settings	106
Printing Multiple Pages on One Sheet of Paper	108
Duplex Printing	108
Software section Index	109
A	109
B	109
D	109
E	109
F	109
G	109
H	109
I	109
L	109
M	109
N	109
O	109
P	109
R	109
S	110
T	110
U	110

Match case Limit results 1 per page

Installing Printer Software in Windows

Installing mono printer driver

This printer features a monochrome-only printer. This mono

driver limits output to the black toner, so you can use your

printer as a monochrome printer. You must install the mono

driver on your computer. Following steps guide you through the

step by step installation process.

Make sure that the printer is connected to your computer

and powered on. Or your computer and printer are

connected to the network.

Insert the supplied CD-ROM into your CD-ROM drive. The

CD-ROM should automatically run, and an installation

window appears.

Click

Cancel

If the confirmation window appears, click

Finish

Click

Start

→

Printers and Faxes

Select

Add Printer

When

Add Printer Wizard

appears, click

Select

Local printer attached to this computer

, and

Automatically detect and install my Plug and Play

printer

, then click

. Go to step 13.

If your computer does not find the printer, then follow the

next step.

Select

in the

Select a Printer Port

window.

In the

Select a Printer Port

window, select

Have Disk...

Click

Browse

to find a mono driver for your printer.

ex) Windows XP 32 bit

Select CD-ROM drive

→

Printer

→

PC_MONO

→

WINXP_2000_VISTA-32

Select

***.inf

file and click

Open

Click

in the

Install From Disk

window.

Select a mono driver in the

Printers

field, and click

OTE

: If you have installed a mono driver before, then the

Use Existing Driver

window. Select as the window explains,

and click

. Also, depending on your computer

configuration, the printer sharing window or the print the test

page window may appear; make the appropriate selection.

Enter your printer name, and click

Click

Finish

to start installing a mono printer driver.

OTE

: If your printer is connected to a network, go to

printer's

Properties

and select the

Ports

tab, then click

Add

Port

and

Standard TCP/IP Port

, and create a new port to

connect to the printer. To create a new port, follow the

procedure laid out in the wizard window.