Sanyo PLC-HF15000L RS232 Expand - Page 13
Functional Execution Command Table, 1 Image Command Table, Execute command, 2 PC Control Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1 Image Command Table Execute command CF_CONT_%1[CR] CF_BRIGHT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_COLMNSAV_%1[CR] CF_COLMNLD_%1[CR] CF_APCTRL_%1[CR] CF_COLTEMP_%1[CR] CF_WBAL-R_%1[CR] Item Set value of Contrast Set value of Brightness Set value of Color Set value of Tint Set area to store current values of Color Management Set area to load values of Color Management Set level of Auto Picture Control Set level of Color Temperature Set Red value of White Balance CF_WBAL-G_%1[CR] Set Green value of White Balance CF_WBAL-B_%1[CR] Set Blue value of White Balance CF_OFFSET-R_%1 [CR] Set Red value of Offset CF_OFFSET-G_%1 [CR] Set Green value of Offset CF_OFFSET-B_%1 [CR] CF_SHARP_%1[CR] CF_GAMMA_%1[CR] CF_NZRED_%1[CR] CF_PROGV_%1[CR] CF_IMAGE_%1[CR] CF_IMAGEADJ_%1[CR] CF_ADVCOL_%1[CR] Set Blue value of Offset Set value of Sharpness Set value of Gamma Set ON/OFF of Noise reduction Set mode of Progressive scan Set Image mode Set Store/Reset of values in Image Adjustment Set mode of Advanced color setting 5.2 PC Control Command Table Execute command CF_FSYNC_%1[CR] CF_TDOTS_%1[CR] CF_CLAMP_%1[CR] CF_H-POS_%1[CR] CF_V-POS_%1[CR] CF_DDOTS_%1[CR] CF_DLINE_%1[CR] CF_ORGMODE_%1[CR] CF_PCSTORE_%1[CR] CF_PCMODEFREE_%1 [CR] Item Set value of Fine Sync Set value of Total Dots Set value of Clamp Set value of Horizontal Position Set value of Vertical Position Set value of Display Dots Set value of Display Line Specify the original signal for the selected PC mode Store current setting values in PC Adjust menu to Mode %1 Delete the values registered in Mode %1 and return it to Free status. 13/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/13.png)