Sanyo PLC-HF15000L RS232 Expand - Page 83

PLC-HF15000L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Commands 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Get the information of Lamp Replacement time Acceptable "000_%1" [CR] "4****" 4 indicates 4 lamps are used in this model. indicates the status of each lamp in lamp number order. "Y" means the lamp operating time is over the Response %1 threshold for lamp replacement, and "N" means it has not reached to. e.g. "4NYYN" --------- This indicates it is 4-lamps system, and Lamp #1 and #4 have not been reached to the replacement time while #2 and #3 should be replaced. Unacceptable "?" [CR] 9.9.2 CR_LAMPMODE Command Command "CR_LAMPMODE" [CR] Details Get Lamp mode setting status Acceptable "000_%1" [CR] "4LAMP Lamp mode is set to 4-Lamps "3LAMPAUTO" --- Lamp mode is set to 3-Lamps (Auto) and automatically and preferentially uses lamps with shorter cumulated lighting time "3LAMP123" ----- Lamp mode is set to 3-Lamps (LAMP1, 2 and 3) "3LAMP234" ----- Lamp mode is set to 3-Lamps (LAMP2, 3 and 4) Response %1 "3LAMP134" ----- Lamp mode is set to 3-Lamps (LAMP1, 3 and 4) "3LAMP124" ----- Lamp mode is set to 3-Lamps (LAMP1, 2 and 4) "2LAMPAUTO" --- Lamp mode is set to 2-Lamps (Auto) and automatically and preferentially uses lamps with shorter cumulated lighting time "2LAMP23" ----- Lamp mode is set to 2-Lamps (LAMP2 and 3) "2LAMP14" ----- Lamp mode is set to 2-Lamps (LAMP1 and 4) "CONSTANT" ------ Lamp mode is set to Constant mode. Unacceptable "Error Code" [CR] 9.9.3 CR_LAMPCONSTTAR Command Command "CR_LAMPCONSTTAR" [CR] Details Get value of Target for Constant mode Acceptable "000_%1" [CR] Response %1 "0000"-"1024" Unacceptable "Error Code" [CR] 9.9.4 CR_LAMPCONSTCUR Command Command "CR_LAMPCONSTCUR" [CR] Details Get value of Current for Constant mode Acceptable Response %1 "000_%1" [CR] "0000"-"1024" Unacceptable "Error Code" [CR] 83/105