Sanyo PLC-HF15000L RS232 Expand - Page 42
CF_LAMPLIFECONTRL Command, 8.5 CF_LAMPINTERVAL Command
![]() |
View all Sanyo PLC-HF15000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
PLC-HF15000L Expand Serial Command Functional Specifications 8.8.4 CF_LAMPLIFECONTRL Command Command "CF_LAMPLIFECONTRL_%1" [CR] %1 "MODE1 Set Lamp life control mode to Mode1 "MODE2 Set Lamp life control mode to Mode2 Details Select Lamp life control. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.8.5 CF_LAMPINTERVAL Command Command "CF_LAMPINTERVAL_%1" [CR] "0024 Set Lamp interval to 24 hours "0200 Set Lamp interval to 200 hours %1 "0500 Set Lamp interval to 500 hours "1000 Set Lamp interval to 1000 hours "2000 Set Lamp interval to 2000 hours "OFF Set Lamp interval to OFF Details Select Lamp interval. (Valid only when in the normal Power ON status.) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 42/105
![](/manual_guide/products/sanyo-plchf15000l-rs232-expand-718341b/42.png)